5 simultaneously working axes
The second rotary axis (B axis) with a rotation range of up to ± 30 degrees enables you to mill undercuts.
Non-stop machining thanks to 8-fold blank changer. You fit the changing station with blanks via a smaller additional front cover. The proper blank for your milling job is inserted into the fixing device automatically when required. The machine can mill around the clock.
Wide range of materials and indications
Machining of plastics, wax, PEEK, zirconium oxide and composites up to non-precious alloys on cobalt-chrome basis and glass ceramics. For crowns, bridges , inlays, onlays, abutments, telescope crowns, model plates, model casts, bite splints, model plug-in teeth, implant bars, veneers, table-tops, etc.
Wet grinding option
S2 is prepared for connecting the wet grinding module. There are liquid nozzles readily mounted at the spindle so that the tool is cooled while grinding, allowing you to grind materials like glass ceramics (VITABLOCS® Mark II, VITA ENAMIC®, VITA SUPRINITY®, IPS Empress®, IPS e.max®).